Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#enable sim
Command: enable sim
Success.
DGS-3400:4#
disable sim
Purpose Used to disable Single IP Management (SIM) on the Switch.
Syntax
disable sim
Description This command will disable SIM globally on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
DGS-3400:4#
To disable SIM on the Switch:
DGS-3400:4#disable sim
Command: disable sim
Success.
show sim
Purpose Used to view the current information regarding the SIM group on the Switch.
Syntax
show sim {[candidates {<candidate_id 1-100>} | members {<member_id 1-32>}
| group {commander_mac <macaddr>}] | neighbor]}
Description This command will display the current information regarding the SIM group on the
Switch, including the following:
SIM Version - Displays the current Single IP Management version on the Switch.
Firmware Version - Displays the current Firmware version on the Switch.
Device Name - Displays the user-defined device name on the Switch.
MAC Address - Displays the MAC Address of the Switch.
Capabilities – Displays the type of switch, be it Layer 2 (L2) or Layer 3 (L3).
Platform – Switch Description including name and model number.
SIM State –Displays the current Single IP Management State of the Switch,
whether it be enabled or disabled.
Role State – Displays the current role the Switch is taking, including Commander,
Member or Candidate. A Stand-alone switch will always have the commander role.
Discovery Interval - Time in seconds the Switch will send discovery packets out
over the network.
Hold time – Displays the time in seconds the Switch will hold discovery results
before dropping it or utilizing it.
Parameters candidates <candidate_id 1-100> - Entering this parameter will display information
concerning candidates of the SIM group. To view a specific candidate, include that
candidate’s ID number, listed from 1 to 100.
members <member_id 1-32> - Entering this parameter will display information
concerning members of the SIM group. To view a specific member, include that
member’s ID number, listed from 1 to 32.
group {commander_mac <macaddr>} - Entering this parameter will display
267