Specifications

ManualsBrandsEdge10 ManualsComputer equipmentC171

241

242

243

244

245

246

247

248

249

250

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual

show authen_enable

all – Entering this parameter will display all the authentication login

methods currently configured on the Switch.

The window will display the following parameters:

Restrictions None.

 Method List Name – The name of a previously configured

method list name.

 Priority – Defines which order the method list protocols will be

queried for authentication when a user attempts to log on to

the Switch. Priority ranges from 1(highest) to 4 (lowest).

 Method Name – Defines which security protocols are

implemented, per method list name.

 Comment – Defines the type of Method. User-defined Group

refers to server groups defined by the user. Built-in Group

refers to the TACACS, XTACACS, TACACS+ and RADIUS

security protocols which are permanently set in the Switch.

Keyword refers to authentication using a technique INSTEAD

of TACACS/XTACACS/TACACS+/RADIUS which are local

(authentication through the local_enable password on the

Switch) and none (no authentication necessary to access any

function on the Switch).

Example usage:

To display all method lists for promoting user level privileges to administrator level privileges.

DGS-3400:4#show authen_enable all

Command: show authen_enable all

Method List Name Priority Method Name Comment

---------------- -------- --------------- ------------------

Permit 1 tacacs+ Built-in Group

2 tacacs Built-in Group

3 Darren User-defined Group

4 local Keyword

default 1 tacacs+ Built-in Group

2 local Keyword

Total Entries : 2

DGS-3400:4#

config authen application

Purpose Used to configure various applications on the Switch for authentication

using a previously configured method list.

Syntax

enable] [default | method_list_name <string 15>]

Description This command is used to configure Switch configuration applications

(console, Telnet, SSH, web) for login at the user level and at the

administration level (authen_enable) utilizing a previously configured

method list.

Parameters application – Choose the application to configure. The user may choose one