Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
login
Purpose Used to log in a user to the Switch’s console.
Syntax
login
Description This command is used to initiate the login procedure. The user will be
prompted for a Username and Password.
Parameters None.
Restrictions None.
Example usage:
To initiate the login procedure:
DGS-3400:4#login
Command: login
UserName:
create trusted_host
Purpose Used to create the trusted host.
Syntax
create trusted_host <ipaddr>
Description The create trusted_host command creates the trusted host. The Switch
allows specification of up to four IP addresses that are allowed to manage
the Switch via in-band SNMP or TELNET based management software.
These IP addresses must be members of the Management VLAN. If no IP
addresses are specified, then there is nothing to prevent any IP address
from accessing the Switch, provided the user knows the Username and
Password.
Parameters
<ipaddr> − The IP address of the trusted host to be created.
Restrictions Only administrator-level users can issue this command.
Example usage:
To create the trusted host:
DGS-3400:4#create trusted_host 10.48.74.121
Command: create trusted_host 10.48.74.121
Success.
DGS-3400:4#
show trusted_host
Purpose Used to display a list of trusted hosts entered on the Switch using the create
trusted_host command above.
Syntax
show trusted_host <ipaddr>
Description This command is used to display a list of trusted hosts entered on the Switch
using the create trusted_host command above.
Parameters
<ipaddr> − The IP address of the trusted host to be viewed.
Restrictions Only administrator-level users can issue this command.
Example usage:
To display the list of trust hosts:
20