Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
enable dhcp_relay
Purpose Used to enable the DHCP/BOOTP relay function on the Switch.
Syntax
enable dhcp_relay
This command is used to enable the DHCP/BOOTP relay function on
the Switch.
Description
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable DHCP relay:
DGS-3400:4#enable dhcp_relay
Command: enable dhcp_relay
Success.
DGS-3400:4#
disable dhcp_relay
Purpose Used to disable the DHCP/BOOTP relay function on the Switch.
Syntax
disable dhcp_relay
Description This command is used to disable the DHCP/BOOTP relay function on the
Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable DHCP relay:
DGS-3400:4#disable dhcp_relay
Command: disable dhcp_relay
Success.
DGS-3400:4#
216