Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#config cpu access_profile profile_id 5 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 deny
Command: config cpu access_profile profile_id 10 add access_id 1 ip vlan default
source_ip 20.2.2.3 destination_ip 10.1.1.252 dscp 3 icmp type 11 code 32 deny
Success.
DGS-3400:4#
show cpu_access_profile
Purpose Used to view the CPU access profile entry currently set in the Switch.
Syntax
show cpu_access_profile {profile_id <value 1-5>}
Description The config cpu_interface_filtering state command is used view the current CPU
interface filtering entries set on the Switch.
Parameters
profile_id <value 1-5> − Enter an integer between 1 and 5 that is used to identify the
CPU access profile to be deleted with this command. This value is assigned to the
access profile when it is created with the create cpu access_profile command
Restrictions None.
Example usage:
To show the CPU filtering state on the Switch:
DGS-3400:4#show cpu access_profile
Command: show cpu access_profile
CPU Interface Filtering State: Disabled
CPU Interface Access Profile Table
Access Profile ID: 1 TYPE : Ethernet
================================================================================
MASK Option :
VLAN 802.1p
---------- ------
Access ID: 2 Mode: Permit
---------------------
default
================================================================================
Total Entries: 1
DGS-3400:4#
199