Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To display information about installed modules:
DGS-3400:4# show module_info
Command: show module_info
BOX ID Module Name Rev. Serial Description
ID No.
--- -- ------------- ---- ---------- --------------------------------
1 1 DEM-410X A0 PA5A5A5A5 1 Port XFP Module
1 2 DEM-410X A0 PA5A5A5A5 1 Port XFP Module
DGS-3400:4#
show device_status
Purpose Used to display current status of fans and power or power supplies.
Syntax
show device_status
Description Displays information on the status of system fans and power
supplies.
Parameters None.
Restrictions None
Example usage:
To display status of fans and power supply:
DGS-3400:4#show device_status
Command: show device_status
ID Internal Power External power Side Fan Back Fan
-- -------------- -------------- -------- ----------
1 Active Ready OK Fail
DGS-3400:4#
show session
Purpose Used to display a list of currently logged-in users.
Syntax
show session
Description This command displays a list of all the users that are logged-in at
the time the command is issued.
Parameters None
Restrictions Only Administrator-level users can issue this command.
Example usage:
To display the way that the users logged in:
13