Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
DGS-3400:4#show igmp_snooping
Command: show igmp_snooping
IGMP Snooping Global State : Enabled
Multicast router Only : Enabled
VLAN Name : default
Query Interval : 125
Max Response Time : 10
Robustness Value : 2
Last Member Query Interval : 1
Host Timeout : 250
Router Timeout : 260
Leave Timer : 2
Querier State : Enabled
Querier Router Behavior : Non-Querier
State : Enabled
Fast Leave : Disabled
Total Entries: 1
DGS-3400:4#
show router_ports
Purpose Used to display the currently configured router ports on the Switch.
Syntax
show router_ports [static | dynamic | forbidden]
Description This command will display the router ports currently configured on the
Switch.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port
resides.
static − Displays router ports that have been statically configured.
dynamic − Displays router ports that have been dynamically configured.
forbidden – Displays ports that are forbidden from becoming router ports.
Restrictions None.
Example usage:
To display the router ports.
DGS-3400:4#show router_ports
Command: show router_ports
VLAN Name : default
Static router port :
Dynamic router port : 3:2
Forbidden router port :
DGS-3400:4#
show igmp_snooping group
Purpose Used to display the current IGMP snooping configuration on the
Switch.
Syntax
show igmp_snooping group {vlan <vlan_name 32>}
Description This command will display the current IGMP Snooping Group
configuration setup currently configured on the Switch.
153