Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To configure IGMP snooping:
DGS-3400:4#config igmp_snooping querier vlan default query_interval 125 state enable
Command: config igmp_snooping querier vlan default query_interval 125 state enable
Success.
DGS-3400:4#
config router_ports
Used to configure ports as router ports.
Syntax
config router_ports <vlan_name 32> [add | delete] <portlist>
Description This command allows designation of a range of ports as being
connected to multicast-enabled routers. This will ensure that all
packets with such a router as its destination will reach the multicast-
enabled router − regardless of protocol, etc.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port
resides.
add / delete – Use these parameters to either add or delete router
ports to the specified VLAN.
<portlist> − Specifies a port or range of ports that will be configured
as router ports. The port list is specified by listing the lowest switch
number and the beginning port number on that switch, separated by
a colon. Then the highest switch number, and the highest port
number of the range (also separated by a colon) are specified. The
beginning and end of the port list range are separated by a dash. For
example, 1:3 specifies switch number 1, port 3. 2:4 specifies switch
number 2, port 4. 1:3-2:4 specifies all of the ports between switch 1,
port 3 and switch 2, port 4 − in numerical order. Non-contiguous
portlist entries are separated by a comma. (ex: 1:1-1:3,1:7-1:9)
Restrictions Only administrator-level users can issue this command.
Purpose
Example usage:
To set up static router ports:
DGS-3400:4#config router_ports default add 1:1-1:10
Command: config router_ports default add 1:1-1:10
Success.
DGS-3400:4#
config router_ports_forbidden
Purpose Used to configure ports as forbidden multicast router ports.
Syntax
config router_ports_forbidden <vlan_name 32> [add | delete]
<portlist>
Description This command allows designation of a port or range of ports as being
forbidden to multicast-enabled routers. This will ensure that multicast
packets will not be forwarded to this port − regardless of protocol, etc.
Parameters
<vlan_name 32> − The name of the VLAN on which the router port
resides.
150