Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
4
BASIC SWITCH COMMANDS
The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the
following table.
Command Parameters
create account [admin | user] <username 15>
config account <username>
show account
delete account <username>
show module_info
show device_status
show session
show switch
show serial_port
config serial_port {baud_rate [9600 | 19200 | 38400 | 115200] auto_logout [never | 2_minutes | 5_minutes
| 10_minutes | 15_minutes]}
enable clipaging
disable clipaging
enable telnet <tcp_port_number 1-65535>
disable telnet
enable web <tcp_port_number 1-65535>
disable web
save {[config <config_id 1-2> | log | all]}
reboot
reset {[config | system]}
login
logout
create trusted_host <ipaddr>
delete trusted_host <ipaddr>
show trusted_host <ipaddr>
10