Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
Example usage:
To set the ingress checking status, the sending and receiving GVRP information :
DGS-3400:4#config gvrp 1:1-1:4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Command: config gvrp 1:1-1:4 state enable ingress_checking enable
acceptable_frame tagged_only pvid 2
Success.
DGS-3400:4#
enable gvrp
Purpose Used to enable GVRP on the Switch.
Syntax
enable gvrp
Description This command, along with disable gvrp below, is used to enable and
disable GVRP on the Switch, without changing the GVRP configuration
on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable the GARP VLAN Registration Protocol (GVRP):
DGS-3400:4#enable gvrp
Command: enable gvrp
Success.
DGS-3400:4#
disable gvrp
Purpose Used to disable GVRP on the Switch.
Syntax
disable gvrp
Description This command, along with enable gvrp, is used to enable and
disable GVRP on the Switch, without changing the GVRP
configuration on the Switch.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To disable the GARP VLAN Registration Protocol (GVRP):
DGS-3400:4#disable gvrp
Command: disable gvrp
Success.
DGS-3400:4#
117