Specifications

xStack DGS-3400 Series Layer 2 Gigabit Managed Switch CLI Manual
config mirror port
tx − Allows the mirroring of only packets sent to (flowing out of) the
port or ports in the port list.
both − Mirrors all the packets received or sent by the port or ports in
the port list.
Restrictions The Target port cannot be listed as a source port. Only administrator-
level users can issue this command.
Example usage:
To add the mirroring ports:
DGS-3400:4#
DGS-3400:4# config mirror port 1:1 add source ports 1:2-1:7 both
Command: config mirror port 1:1 add source ports 1:2-1:7 both
Success.
Example usage:
To delete the mirroring ports:
DGS-3400:4#config mirror port 1:1 delete source ports 1:2-1:4 both
Command: config mirror port 1:1 delete source ports 1:2-1:4 both
Success.
DGS-3400:4#
enable mirror
Purpose Used to enable a previously entered port mirroring configuration.
Syntax
enable mirror
Description This command, combined with the disable mirror command below,
allows users to enter a port mirroring configuration into the Switch,
and then turn the port mirroring on and off without having to modify
the port mirroring configuration.
Parameters None.
Restrictions Only administrator-level users can issue this command.
Example usage:
To enable mirroring configurations:
DGS-3400:4#enable mirror
Command: enable mirror
Success.
DGS-3400:4#
110
disable mirror
Purpose Used to disable a previously entered port mirroring configuration.
Syntax
disable mirror
Description This command, combined with the enable mirror command above,
allows users to enter a port mirroring configuration into the Switch,