User manual

Once cutter has been led, the leading edge, when viewed from the side,
should hook slightly forward (A). The cutting edge at the outermost tip of
the top plate should be slanted at 60°. The chain will cut best when all cut-
ters are led to the same length (B).
15
Maintaining TriLink Saw Chain
A
TWO
B
60º
THREE
FOUR
C
New Cutter Cutter Filed Down
Depth Gauge Untouched
Cutter Filed Down
Depth Gauge Filed Down
Depth Gauge Setting Depth Gauge Setting Depth Gauge Setting
CAUTION: Do not alter guard link tangs (C) except when ling depth
gauges. Do not le cutter more than recommended and do not exceed
depth gauge clearance. Any deviation from these recommendations will
greatly increase the danger of kickback.