Specifications

Electrified Applications
ED5000.41
ED5000 Series Pushpad Exit Devices
Latch Pullback - M94 Option
Components
ED5200 x M94 Latch Retraction Exit Device -
Corbin Russwin
781N Power Control Unit - Corbin Russwin
6900 Powermatic - Norton
660 Push Pads - Norton
FAEPTL - Corbin Russwin
Operation
Operation of Push Pads from either side
of door will activate the 781N Controller
for the Latch Retraction Exit Device. An
internal timer on the 6900 will also
provide length of time door is open
and latch being retracted. Door
operator also acts like standard closer
when opened manually.
Electric Dogging & Touchbar Monitoring
Switch - M97 & M92
Components
ED5800 x M92 x M97 with Cyl. + Bar Monitor
& Elect. Dogging - Corbin Russwin
6900 Powermatic- Norton
660 Push Pads - Norton
FAEPTL - Corbin Russwin
FABPS-24-1 Power Supply - Corbin Russwin
FAMKA Key Switch - Corbin Russwin
Operation
Operation of Electric Dogging
combined with the Door Monitor
Switch will enable Push Pads for
operation of the 6900. A maintained
keyswitch will control the activation
of the electric dogging which is
powered by the FABPS Power supply.
A Fire Alarm Tie-In, if required,
will release the dogging and let the
operator work in manual mode when
activated. (NOTE: Electric Dogging
is not automatic like Latch Retraction.
It requires the bar to be pushed in
manually the first time after
applying power.)
Rim Device with Electric Strike
Components
ED5200 Exit Device - Corbin Russwin
FADK-11 Digital Keypad - Folger Adam
310-4 Electric Strike - Folger Adam
FABPS-24-1 Power Supply - Corbin Russwin
Operation
Operation of FADK-11 Digital Keypad will
allow keyless entry from the non-protected
side of opening. Free exit using the exit
device from the protected side of the door.
ED5200
ED5800
ED5200