Specifications

Steps 7-9
7) Remove the top canopy by
un-screwing set screw counter
clockwise. Slide the wire
coming out of the aileron servo
into the receiver cabin as
shown. Now flip the plane over
and insert aileron servo into
channel 1 on receiver. (Make
sure to match the colors of all
the plug wires for correct
polarity)
8) Insert the main wing onto
the fuselage by inserting the
male plastic portion into
female receptor.
9) Use the nylon bolt to fasten
the main wing to the
fuselage. Do not over tighten.
- 5 -