Specifications

Steps 4-6
4) Gently open the clevis and
fasten it to the inner most hole
on the control horn on both the
rudder and the elevator (using
the inner most hole provides
maximum control throws that
are recommended for proper
aerobatics). You may need to
adjust the clevis for neutral
position.
5) Insert the main landing gear
into the small opening in front
of the battery bay on the
underside of the fuselage.
6) Attach the tail wheel onto
the rudder with the plastic
U-shaped piece and fasten it
with the black self tapping
screw. Make sure the
U-shaped piece is pushed as
far back as it can go.
- 4 -