Specifications

ASSEMBLY
Steps 1-3
1) Slide the Rudder (vertical
stab) into elevator (horizontal
stab). Make sure the control
horn on elevator is facing down
when you do this. Line up
plastic (L-shape piece on
Rudder) onto the molded
groove on the elevator.
2) Insert the assembled tail
into the fuselage. Make sure
that the tail is fully secured into
the fuselage by gently pushing
it forward as far as it can go.
3) Use the small silver flat
head screw in the accessories
pack to fasten each side of the
rudder to the elevator. Make
sure the screw catches into
the plate on the opposite side.
- 3 -