Yard Vacuum User Manual

Edge Products, LLC GM LLY EZ Manual
6
Thank you for purchasing the Power Edge LLY EZ Module for the
Chevy/GMC Duramax® Diesel LLY. The EZ module has been developed and
produced from the highest quality materials available to ensure the best
performance for years to come. If you have any questions, please contact Edge
Products. We will be very happy to answer your questions about our complete
product line (1-888-360-3343).
The EZ Module is an add-on Engine Control Module (ECM) for the Duramax®
Engine that offers additional features not available with the factory setup. Since
it is an add-on ECM, it uses all the factory data, and then enhances the factory
settings to optimize your truck’s performance.
These features include:
• Engine temperature monitoring and power increase from the EZ module
as engine reaches operating temperature
• Three selectable power level settings that can be changed on the fly
• Smart power control during torque converter lockup to allow a smooth,
easy torque converter clutch lock-up
The EZ module offers a large power increase over stock throughout the rpm
range, but the power is most noticeable in the midrange rpm’s. This greatly
improves drivability and towing performance. Transmission downshifting is
greatly reduced, especially while passing or towing.
The EZ also regulates power delivery and timing based on engine temperature.
This means that while the engine temperature is below 160° F no additional
fueling or timing is delivered. At 160° F the module begins delivering fuel and
adding timing at 50% of the calculated additional fuel, and the percentage
increases as the engine temperature increases, until at full engine temperature
(174° F) the EZ delivers 100% of the calculated additional fuel and added
timing.
All Edge modules and programmers are built to operate with OEM calibrations. When
you take your vehicle to a service center they may, by your request or otherwise, update
your vehicles calibrations. Therefore it is important that you return your vehicle to stock
before taking it in for service. Edge updates its active products (i.e. those currently being
manufactured) to work effectively with updated OEM calibrations. However, this process
can take some time as Edge is not always made aware of calibration changes made by the
OEM. In the case of discontinued products, Edge cannot ensure that your unit will work
effectively if you take your vehicle to a dealership and you are given, by your request or
otherwise, a new calibration.
About the Power Edge LLY EZ