Product Specs

POWER 键将同时传输 BT 和 IR。

POWER key will transmit BT and IR simultaneously.

4.8 IR Function：

HOW TO SET UP THE RCU By entering Device Code

 You may setup the URC by following the code entering instructions.

 Referring to the DEVICE CODE LIST, look up the 3-digit Device Code which corresponds to the

brand of your TV. If there is more than one Device Code listed under your brand, start from the first

code.

 Hold down “ POWER ” and “ VOL+ ” on the URC simultaneously for 2 seconds until the indicator

lights up.

 Use the number keys 0-9 to enter your 3 digit Device Code, the indicator should go out immediately.

 Turn on your device (TV), then try the function keys on the URC. If your device responds to your

activated function correctly, you have entered the right Device Code. Otherwise, repeat the above

step with the next available Device Codes until your device responds to your activated function, and

most keys work correctly.

Note:

 If the indicator flashes 6 times in step 3, a wrong Device Code has been entered. You are required

to repeat step 2 to 3 again.

 If there is no any input for 10seconds, the remote will exit the code setup mode automatically and

the LED turns off.

 For future reference you are recommended to take a note of your Device Codes in the space

provided on the product’s back label after setting up the URC correctly.

Reset to Factory Settings (IR + BLE)