User guide

2
E
MOUNTING PLATE
NUT
POWER WIRE
7:
crossbar threaded nipple and secure it with the nut provided.
Slide the cover and mounting plate center hole onto the
COVER
ELECTRICAL BOX
8:
#8 screws.
Secure the mounting plate to the anchors with the provided
6
F
8
8
#8 SCREW
G
9:
with local electrical codes.
10: Connect the white fixture wire to the neutral power wire
with a wire nut.
11: Connect the black fixture wire to the hot power wire with a
wire nut.
Make sure the mounting plate is grounded in accordance
CANOPY
ELECTRICAL BOX
9
1011
H
#8-32 SCREW
12: Place all the wires and wire nut connections inside the
canopy.
13: Align and secure the canopy to the mounting plate by
tightening the six #8-32 screws.
12
13
13
14:
one Fast Jack canopy port.
Use fingers to tighten each Fast Jack fixture connector into
FAST JACK
FIXTURE
CONNECTOR
I
14
FAST JACK
CANOPY
PORT
14
CAUTION: Risk of Fire: MAX load of Fast Jack LED canopy is
60 watt per port.