Manual

2
D
7
6
6: Connect the white fixture wire to the neutral power wire with
a wire nut.
7: Connect the black fixture wire to the hot power wire with a
wire nut.
E
FIXTURE BODY HOLE
MOUNTING BRACKET TAB
9
8
8: Place all wires and wire nut connections behind the fixture
body.
9: Place the left fixture body hole onto the mounting bracket
tab.
FLAT HEAD
PHILLIPS SCREW
F
10
FIXTURE
BODY
CANOPY
10: Secure the right fixture body hole with the flat head Phillips
screw provided.
G
LAMP
SOCKET
11
11
11: Place one end of the lamp onto one socket pin, while
pushing the lamp against that socket pin slide the other
end onto the other socket pin.
12: Loosen the screws on the spring clips to insert the glass
cover under the clips. Slightly tighten the spring clip screws
to secure glass cover in place.
CAUTION:
To reduce risk of a burn or electrical shock during
lamping, disconnect the power to the fixture.
NOTE: Use only fingers and a soft cloth to install the lamp.
Use MAX 100 Watt Type T3-78mm, Double
End Halogen Lamp.
GLASS COVER
SPRING
CLIP
12
12