User guide

System Configuration
4-8
4
Reboot System
The Reboot System page allows you to restart the access point software and restore
factory default settings.
Figure 4-7. Reboot System
The displayed items on this page can be described as follows:
• Restore Factory Settings – Click the Restore button to reset the configuration
settings for the access point to the factory defaults and reboot the system. Note
that all user configured information will be lost. You will have to use the default IP
address to re-gain management access to the access point.
• Reboot Access Point – Click the Reboot button to reboot the system.
Note: If you have upgraded the system software, then you must reboot the access point
to implement the new code.