User guide

System Settings
4-7
4
System Settings
The system settings pages allow you to change the management access password
and restart the access point.
Administration
Management access to the access point is controlled through a single user name
and password.
To protect access to the management interface, you need to change the default user
name and password as soon as possible. If the default values are not changed, then
anyone having access to the access point may be able to compromise access point
and network security.
Note: If you forget your user name or password, you can press the reset button on the
back of the access point for more than five seconds to reset to the factory
defaults.
Figure 4-6. Administration Password
The displayed items on this page can be described as follows:
• Username – The name of the user. The default is "Edge-Core." The user name
can be changed. (Length: 0-16 characters, case sensitive)
• New Password – The password for management access. (Length: 0-16
characters, case sensitive)
• Confirm New Password – Enter the password again for verification.