User guide

Hardware Description
1-3
1
Wi-Fi Phone Cradle
The WA4101-Cradle accepts an Edge-Core Wi-Fi Phone in its cradle for charging
the battery. When the device is powered on, just place the phone in the cradle and
charging starts immediately.
LED Indicators
The access point includes three status LED indicators, as described in the following
figure and table.
Ethernet Port
The access point has one 10BASE-T/100BASE-TX RJ-45 port that can be attached
directly to 10BASE-T/100BASE-TX LAN segments. Connect this port to the device
(cable or ADSL modem) that provides your Internet access, or to a LAN switch in a
network that has Internet access.
This port supports automatic MDI/MDI-X operation, so you can use straight-through
cables for all network connections to PCs, switches, or hubs.
LED Status Description
POWER On Green Indicates that the system is working normally.
WLAN On Indicates the 802.11g radio is enabled and transmitting or
receiving data through wireless links. The flashing rate is
proportional to network activity.
Off Indicates the 802.11g radio is disabled.
INTERNET On/Flashing Green Indicates a valid link on the Ethernet port and that the access
point is transmitting or receiving data. The flashing rate is
proportional to network activity.
Off The Ethernet port has no valid link.
Power
802.11g
Wireless
Link/Activity
Ethernet
Link/Activity