User guide

Hardware Description
1-3
1
LED Indicators
The Mini AP Router includes four status LED indicators, as described in the following
figure and table.
Ethernet RJ-45 Ports
The Mini AP Router has the following RJ-45 ports:
• The RJ-45 LAN port is for connection to a PC or to a 10/100 Mbps.
• The RJ-45 WAN port is for connection to a DSL or cable modem, or to a LAN or
other device that provides your Internet access.
Both ports auto-negotiate the operating speed to 10/100 Mbps, the mode to half/full
duplex, and the pin signals to MDI/MDI-X. Automatic MDI/MDI-X support enables
you to use straight-through cables for all network connections to PCs, switches, or
hubs.
LED Status Description
POWER On Green Indicates that the system is working normally.
WAN On/Flashing Green Indicates a valid link on the WAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
LAN On/Flashing Green Indicates a valid link on the LAN Ethernet port. Flashing indicates
network activity.
Off The Ethernet port has no valid link.
WLAN On/Flashing Green Indicates the 802.11b/g radio is enabled. Flashing indicates
wireless network activity.
Off Indicates the 802.11b/g radio is disabled.
Power
LAN Link/Activity
802.11b/g Link/
Activity
WAN Link/Activity