User guide

Troubleshooting
A-2
A
Diagnosing LED Indicators
Troubleshooting Chart
Symptom Action
POWER LED is Off • The AC power adapter may be disconnected. Check connections
between the Mini AP Router, the power adapter, and the wall outlet.
WLAN LED is Off • The Mini AP Router’s radio has been disabled through it’s web
management interface. Access the management interface using a web
browser to enable the radio.
LAN/WAN LED is Off
(when port connected)
• Verify that the Mini AP Router and attached device are powered on.
• Be sure the cable is plugged into both the Mini AP Router and
corresponding device.
• Verify that the proper cable type is used and its length does not exceed
specified limits.
• Check the cable connections for possible defects. Replace the
defective cable if necessary.