User guide

WAN
5-9
5
WAN
Specify the WAN connection parameters provided by your Internet Service Provider
(ISP).
WAN Settings
Specifies the type of WAN connection to use. The selected option depends on the
device connected to the WAN port and your specific ISP service.
Figure 5-8. WAN Settings
The displayed items on this page can be described as follows:
WAN Configuration — Set the IP address configuration of the Mini AP Router.
• DHCP – Enables the Mini AP Router to automatically obtain an IP address from a
DHCP server.
- WAN IP Address: The IP address of the Mini AP Router. Valid IP addresses
consist of four decimal numbers, 0 to 255, separated by periods.
- Subnet Mask: The mask that identifies the host address bits used for routing to
specific subnets.
- MAC Address: Some ISPs limit Internet connections to a specified MAC
address of one PC. This setting allows you to manually change the MAC
address of the Mini AP Router's WAN interface to match the PC's MAC address
provided to your ISP for registration. You can enter the registered MAC address
manually by typing it in the boxes provided. Otherwise, connect only the PC with
the registered MAC address to the Mini AP Router, then click the Clone MAC
Address of PC button.