User guide

Using the Setup Wizard
4-5
4
- Default Gateway – The IP address of the gateway router that is used if the
requested destination address is not on the local subnet.
- WAN DNS Server – The IP address of a Domain Name Server. A DNS maps
numerical IP addresses to domain names and can be used to identify network
hosts by familiar names instead of the IP addresses.
• PPPoE – Enable the Mini AP Router IP address to be assigned automatically from
an Internet service provider (ISP) through an ADSL modem using PPPoE.
- Reconnect Policy: Select a procedure for the reconnect policy.
- Reconnect Timeout: The number of seconds before the next reconnect
attempt. (valid range:0-600 seconds)
- Username: If your ISP has provided you with a PPPoE user name, enter it in the
corresponding text box.
- Password: If your ISP has provided you with a PPPoE password, enter it in the
corresponding text box.
- MTU: Set the size of Maximum Transmission Unit (MTU) for the largest packet
that the network protocol can transmit.
3. LAN Configuration – Configures the Mini AP Router's IP address and sets the
DHCP server parameters for assigning IP addresses to wireless and LAN
clients:
Figure 4-4. Setup Wizard - LAN Configuration
The displayed items on this page can be described as follows:
• IP Settings — Set the IP address configuration of the Mini AP Router.
- LAN IP Address – Valid IP addresses consist of four decimal numbers, 0 to
255, separated by periods.The default setting is 192.168.1.1.
- Netmask – Indicate the local subnet mask is fixed as 255.255.255.0.