User guide

System Settings
4-4
4
• Firmware Update – Downloads an operation code file from the web management
station to the RG230 using HTTP. Use the Browse button to locate the code file
locally on the management station and click Apply to proceed.
Configuration Tools
The Configurations Tools page allows you to restore factory default settings, or save
and restore the unit’s configuration settings to or from a file on the management
station.
Figure 4-5 Configuration Tools
Restore Factory Default Configuration – Resets the unit to its factory default
settings.
Backup Settings/Restore Settings – When selected, prompts either to backup the
current configuration to a file, or select a previously backed up file to restore to the
unit.
When you select “Restore Factory Default Configuration” and click Apply, a
confirmation page displays. Click the Restore button to continue.
Figure 4-6 Restore Factory Default Configuration