User guide

4-1
Chapter 4: System Settings
The RG230’s System menu allows you to perform general management functions
for the unit, including setting the system time, configuring an access password, and
upgrading the system software.
The System pages include the following options.
Host Name
The RG230 allows you to define a name that identifies your unit and the domain
name used by the local network. Setting a host name enables the web interface to
be accessed using an easy-to-remember name instead of its IP address.
Figure 4-1 System Host Name
•Host Name – Enter the name chosen for the unit. (Default: cpe)
• Domain Name – Enter the domain to which the unit is connected.
Table 4-1 System Settings
Menu Description Page
Host Name Config Configures a host name and domain name 4-1
System Time Configures the system time settings for updates from a time server 4-2
Administrator Settings Configures user password for management
access 4-3
Firmware Upgrade Updates the current firmware 4-3
Configuration Tools Restores the factory default settings, or save the unit’s current
settings
4-4
System Status Displays WAN and LAN interface information and other system
details
4-6
System Log Displays event log entries 4-8
Reset Resets the device 4-9