User guide

3-1
Chapter 3: Initial Configuration
The RG230 can be configured through its web management interface. The web
interface provides a simple Setup Wizard or Advanced Setup options.
Accessing the Web Management Interface
The RG230 has a default IP address of 192.168.1.1 and a subnet mask of
255.255.255.0. If your PC is set to have an IP address assigned by DHCP (Dynamic
Host Configuration Protocol), you can connect immediately to the web management
interface. Otherwise, you must first check if your PC’s IP address is set on the same
subnet as the RG230 (that is, the PC’s IP address starts 192.168.1.x).
In the web browser’s address bar, type the default IP address: http://192.168.1.1.
The web browser displays the RG230’s login page.
Figure 3-1 Login Page
Logging In – Type the default password “admin,” then click Login. The home page
displays.