User guide

2-2
Installing the RG230
2
Cable Connections
The RG230 is a plug-and-play device, so once it has been connected to your PC
and powered up, it is fully operable.
Functioning as a gateway, the unit routes traffic between a WiMAX service
provider’s base station and PCs or notebooks in the local network.
Figure 2-1 CPE Connections
To connect the RG230, follow these steps:
1. Power on the RG230 by connecting the AC power adapter and plugging it into
an AC power source.
Caution: Use ONLY the power adapter supplied with the RG230. Otherwise, the
product may be damaged.
2. Observe the Indicator LEDs. When you power on the RG230, verify that the
Power LED turns on and that the other LED indicators start functioning as
described under “RG230 Hardware Description” on page 1-2.
Notebook Computer
AC Power Adapter
AC Power Outlet
PHONE 1 PHONE 2LAN 1 LAN 2 LAN 3 LAN 4
DC IN
2A
10-19V
Regular Phone