User guide

Introduction
1-4
1
Power Status Indicator LED
The RG230 includes a Power LED indicator that simplifies installation and WiMAX
network troubleshooting. The LED, which is located on the front panel, is described
in the following table.
Figure 1-4 RG230 LED Indicators
Table 1-2 Power Status LED
Status Description
On Green The unit has a network association with a WiMAX base station.
Flashing Green Indicates one of the following conditions:
• When flashing with three of the WiMAX signal LEDs turned on,
indicates authentication has failed.
• When flashing with one of the WiMAX signal LEDs turned on, indicates
authentication has timed out.
On Orange Indicates one of the following conditions:
• After power on, indicates the unit is running its self test.
• The unit is in scan mode or selecting the base station with the
strongest signal.
• Indicates the network entry process has restarted.
Flashing Orange The unit is being reset to factory defaults.
On Red A system failure has occured.
Off No power is being supplied to the unit.
Power
WiFi
Power Status LED
Wi-Fi Status LED
WiMAX Signal LEDs