Installation guide

– 7 –
Figures
Figure 1: ECWO5110/ECWO5110-L Outdoor Access Point 10
Figure 2: Bottom Panel View 10
Figure 3: Top Panel View 11
Figure 4: Power Injector Module 12
Figure 5: System Configuration 15
Figure 6: Installing the AP on a Pole 16
Figure 7: Making a Connection to the RJ-45 Port 17
Figure 8: Connecting AC Power 18
Figure 9: System LEDs 18
Figure 10: Console Port 19
Figure 11: Attach Bracket to Pole 22
Figure 12: Attach Bracket to AP 23
Figure 13: Mount the AP on the Pole 23
Figure 14: Antenna Connector Covers 24
Figure 15: Connect External Antennas 25
Figure 16: PoE Power Injector 27
Figure 17: Ground Wire Connection 29
Figure 18: Connecting the Power Injector 30
Figure 19: Network Status LEDs 33
Figure 20: Network Status LEDs 33
Figure 21: RJ-45 Connector 34
Figure 22: Waterproof RJ-45 Port Cover 37
Figure 23: Making a Connection to the RJ-45 Port 38
Figure 24: Outdoor-Rated Ethernet Cable Drain Wire 39
Figure 25: System Status LEDs 41
Figure 26: System Status LEDs 41
Figure 27: Console Port Connection 43