Installation guide

Chapter 6 | AP Management
Understanding the System Status LEDs
– 41 –
Understanding the System Status LEDs
The AP includes LED indicators that indicate system and port status. The LEDs are
shown below and are described in the following table.
Figure 25: System Status LEDs
5 GHz Link/Activity LED LAN Link/Activity LED
2.4 GHz Link/Activity LED Power/System LED
Figure 26: System Status LEDs
LED Condition Status
Power On Green The system power is on.
Blinking Green The system is currently booting up.
Off System is off (no power).
LAN On Orange Port has a valid link.
Blinking Orange Indicates activity on the port.
Off The link is down.
2.4G On Orange The 802.11b/g/n 2.4 GHz radio is enabled.
Blinking Orange Indicates network activity.
Off The 2.4 GHz radio is disabled.
5G On Orange The 802.11a/n 5 GHz radio is enabled.
Blinking Orange Indicates network activity.
Off The 5 GHz radio is disabled.
1
2
3
4
1
3
2
4