Installation guide

Chapter 3 | AP Chassis
How to Mount the Unit
– 23 –
3. Attach the square mounting plate to the AP with the supplied screws.
Figure 12: Attach Bracket to AP
4. Attach the AP with its mounting plate to the bracket already fixed to the pole.
5. Use the included long bolt to secure the AP to the pole bracket. Note that the
AP tilt angle may need to be adjusted for antenna alignment.
Figure 13: Mount the AP on the Pole
Bracket Mount Points Supplied Bracket Mount Screws
Square Mounting Bracket Part
Long Steel Bolt Tilt Angle Securing Screws (Four)
1
2
3
1
3
2
1
2
1
2