Installation guide

Chapter 2

| Installation Overview

AP Installation Tasks

– 17 –

Figure 7: Making a Connection to the RJ-45 Port

Install the PoE Power Injector and Power On

Install the PoE power injector indoors. Connect the power injector to the Ethernet

cable, a local LAN switch, and an AC power source.

Note that the AP can also be powered by connecting directly to a IEEE 802.3at PoE

switch.

Go to the chapter “Power and Grounding”

Connect outdoor-rated Category 5e or better cable to the RJ-45 port.

Be sure to use the waterproof cover on the port.

Task 4