Installation guide

Chapter 1 | Access Point Overview
Hardware Description
– 12 –
External Antenna Connectors
The ECWO5110/ECWO5110-L AP unit includes three external antenna connectors,
two are for the 2.4 GHz radio and one for the 5 GHz radio (the unit also includes a
built-in 5 GHz antenna). For more information, see “How to Connect External
Antennas” on page 24.
Ground Point
There is a ground point for grounding the AP chassis to earth. For more
information, see “How to Ground the Unit” on page 29.
Pole Mounting Bracket
The included Mounting Bracket Kit can be used to mount the unit on a 1.5 to 6 inch
diameter pole, or to part of a radio mast or tower structure. For more information,
see “How to Mount the Unit” on page 22.
Figure 4: Power Injector Module
Power Injector Module
The AP receives power through a PoE connection to its RJ-45 port. The PoE power is
supplied from a power injector module that is installed indoors. For information,
see “Power Injector Module” on page 27.
External Antenna Connectors
Ground Point
Pole/Wall Bracket Attachment Point
1
2
3