Specifications

Web Configuration
3-19
LACP Setup
The switch supports both static trunking and dynamic Link Aggregation Control
Protocol (LACP). LACP configured ports can automatically negotiate a trunked link
with LACP-configured ports on another device. You can configure any number of
ports on the switch as LACP, as long as they are not already configured as part of a
static trunk. If ports on another device are also configured as LACP, the switch and
the other device will negotiate a trunk link between them.
Field Attributes
• Port – The port number.
• Enabled – Enables LACP on the associated port.
• Key Value – Ports in an aggregated link group must have the same LACP port
Key. For a port to be allowed to join an aggregated group, the port Key must be
set to the same value. When set to zero, the port Key is automatically set by the
switch.
Web – Click TRUNKS, LACP Setup.
Figure 3-18 LACP Port Configuration