Installation guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Initial Configuration
- Chapter 3: Configuring the Switch
- Using the Web Interface
- Navigating the Web Browser Interface
- Web Configuration
- Displaying Status Overview
- Showing Port Statistics
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Tools
- Register Product
- Port Configuration
- Storm Control
- Port Mirroring
- Cable Diagnostic
- Trunk Membership
- Trunk Configuration
- LACP Setup
- LACP Status
- Configuring VLAN Groups
- 802.1X
- LLDP Settings
- LLDP Neighbor Table
- RSTP
- QoS Settings
- SNMP
- PoE
- Appendix A: Software Specifications
- Appendix B: Troubleshooting
ii
• Added the Ingress Filtering Enabled option to the VLAN Port Configuration screen
(page 3-26).
• Updated descriptive text under “802.1X” on page 3-28.
• Added description of counters under “Displaying 802.1X Statistics” on page 3-30.
• Added “RSTP” on page 3-35.
• Added “QoS Settings” on page 3-42.
• Updated descriptive text under “PoE” on page 3-47.
August 2007 Revision
This is the first release of this guide.