Installation guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Initial Configuration
- Chapter 3: Configuring the Switch
- Using the Web Interface
- Navigating the Web Browser Interface
- Web Configuration
- Displaying Status Overview
- Showing Port Statistics
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Tools
- Register Product
- Port Configuration
- Storm Control
- Port Mirroring
- Cable Diagnostic
- Trunk Membership
- Trunk Configuration
- LACP Setup
- LACP Status
- Configuring VLAN Groups
- 802.1X
- LLDP Settings
- LLDP Neighbor Table
- RSTP
- QoS Settings
- SNMP
- PoE
- Appendix A: Software Specifications
- Appendix B: Troubleshooting
Configuring the Switch
3-32
• backendAuthSuccesses – The number of times that the state machine receives an
EAP-Success message from the Authentication Server. Indicates that the
Supplicant has successfully authenticated to the Authentication Server.
Dot1x MIB Counters
• EapolFramesRx – The number of valid EAPOL frames of any type that have been
received by this Authenticator.
• EapolStartFramesRx – The number of EAPOL Start frames that have been
received by this Authenticator.
• EapolRespIdFramesRx – The number of EAP Resp/Id frames that have been
received by this Authenticator.
• EapolReqIdFramesTx – The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
• InvalidEapolFramesRx – The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not recognized.
• LastEapolFrameVersion – The protocol version number carried in the most
recently received EAPOL frame.
• EapolFramesTx – The number of EAPOL frames of any type that have been
transmitted by this Authenticator.
• EapolLogoffFramesRx – The number of EAPOL Logoff frames that have been
received by this Authenticator.
• EapolRespFramesRx – The number of EAP Resp/Id frames that have been
received by this Authenticator.
• EapolReqFramesTx – The number of EAP Req/Id frames that have been
transmitted by this Authenticator.
• EapLengthErrorFramesRx – The number of EAPOL frames that have been
received by this Authenticator in which the Packet Body Length field is invalid.
• LastEapolFrameSource – The source MAC address carried in the most recently
received EAPOL frame.
Other Statistics
• Last Supplicant identity – MAC address of last authorized client.