Installation guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Initial Configuration
- Chapter 3: Configuring the Switch
- Using the Web Interface
- Navigating the Web Browser Interface
- Web Configuration
- Displaying Status Overview
- Showing Port Statistics
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Tools
- Register Product
- Port Configuration
- Storm Control
- Port Mirroring
- Cable Diagnostic
- Trunk Membership
- Trunk Configuration
- LACP Setup
- LACP Status
- Configuring VLAN Groups
- 802.1X
- LLDP Settings
- LLDP Neighbor Table
- RSTP
- QoS Settings
- SNMP
- PoE
- Appendix A: Software Specifications
- Appendix B: Troubleshooting
Configuring the Switch
3-14
Upload/Download Configuration
Web – Click SYSTEM, Tools, Upload/Download Configuration. To upload or
download the configuration file, select “Upload/Download Configuration” from the
Tools drop-down list, then click “Upload” or “Download,” and then click on the
“Browse” button to select the file. Then click the APPLY button to transfer the switch
configuration file.
Figure 3-10 Upload/Download Configuration
Restart Switch
Web – Click SYSTEM, Tools, Restart Switch. To restart the switch, select from the
Tools drop-down list, and then click APPLY. The reset will be complete when the
user interface displays the login page.
Figure 3-11 Restart Switch