Installation guide
Table Of Contents
- Chapter 1: Introduction
- Chapter 2: Initial Configuration
- Chapter 3: Configuring the Switch
- Using the Web Interface
- Navigating the Web Browser Interface
- Web Configuration
- Displaying Status Overview
- Showing Port Statistics
- Displaying the System Name
- Setting the Switch’s IP Address
- Configuring the Logon Password
- Tools
- Register Product
- Port Configuration
- Storm Control
- Port Mirroring
- Cable Diagnostic
- Trunk Membership
- Trunk Configuration
- LACP Setup
- LACP Status
- Configuring VLAN Groups
- 802.1X
- LLDP Settings
- LLDP Neighbor Table
- RSTP
- QoS Settings
- SNMP
- PoE
- Appendix A: Software Specifications
- Appendix B: Troubleshooting
Navigating the Web Browser Interface
3-5
VLANS 3-24
VLAN Membership Configure VLAN port groups. 3-24
VLAN Port Config Configures VLAN behavior for individual ports and
trunks.
3-26
802.1X 3-28
Settings Sets up 802.1X port authentication. 3-29
Statistics Displays the 802.1X statistics collected by the switch. 3-30
LLDP 3-34
Settings Configures LLDP functions. 3-34
Neighbor Displays neighboring device LLDP statistics. 3-35
RSTP 3-35
Settings Configures global and port-specific settings. 3-36
Status Shows Spanning Tree bridge and port status. 3-40
QOS 3-42
Settings Sets the priority of packets forwarded through the
switch.
3-42
SNMP 3-46
Settings Configures SNMP settings. 3-46
POE 3-47
Settings Configures PoE settings. 3-47
LOGOUT Quits to the Login page.
Table 3-2 Switch Main Menu (Continued)
Menu Description Page