Installation guide

Introduction
1-4
1
Figure 1-3. System Status LED
Power Supply Sockets
There is one standard power socket on the rear panel of each switch for the AC
power cord.
Figure 1-4. Power Supply Sockets
Table 1-2 System Status LEDs
LED Condition Status
PWR
(Power)
On Green Internal power is operating normally.
On Amber Internal power supply has failed.
Off Power off or failure.
DIAG
(Diagnostic)
On Green System self-diagnostic test successfully completed.
Blinking Green System self-diagnostic test in progress.
On Amber System self-diagnostic test has failed.
System Status LEDs
Power Socket