Installation guide

Basic Configuration
3-13
3
Web – Click System, System Information. Specify the system name, location, and
contact information for the system administrator, then click Apply. (This page also
includes a Telnet button that allows access to the Command Line Interface via Telnet.)
Figure 3-3 System Information
CLI – Specify the hostname, location and contact information.
Console(config)#hostname R&D 5 4-17
Console(config)#snmp-server location WC 9 4-84
Console(config)#snmp-server contact Ted 4-83
Console(config)#exit
Console#show system 4-31
System Description: 24 Fast Ethernet + 2 Giga + 2 ComboG L2/L4 PoE
Standalone switch
System OID String: 1.3.6.1.4.1.259.8.1.8
System Information
System Up Time: 0 days, 2 hours, 26 minutes, and 30.55 seconds
System Name: R&D 5
System Location: WC 9
System Contact: Ted
MAC Address (Unit1): 00-16-B6-F0-71-3C
Web Server: Enabled
Web Server Port: 80
Web Secure Server: Enabled
Web Secure Server Port: 443
Telnet Server: Enable
Telnet Server Port: 23
Jumbo Frame: Disabled
POST result
DUMMY Test 1 ................. PASS
UART Loopback Test ........... PASS
POE UART Loopback Test ....... PASS
DRAM Test .................... PASS
Timer Test ................... PASS
Done All Pass.
Console#