Installation guide

Main Menu
3-7
3
Port Neighbors Information Displays settings and operational state for the remote side 3-144
Port Broadcast Control Sets the broadcast storm threshold for each port 3-146
Trunk Broadcast Control Sets the broadcast storm threshold for each trunk 3-146
Mirror Port Configuration Sets the source and target ports for mirroring 3-148
Rate Limit 3-149
Input Port Configuration Sets the input rate limit for each port 3-149
Input Trunk Configuration Sets the input rate limit for each trunk 3-149
Output Port Configuration Sets the output rate limit for ports 3-149
Output Trunk Configuration Sets the output rate limit for trunks 3-149
Port Statistics Lists Ethernet and RMON port statistics 3-150
PoE 3-154
Power Status Displays the status of global power parameters 3-155
Power Configuration Configures the power budget for the switch 3-156
Power Port Status Displays the status of port power parameters 3-156
Power Port Configuration Configures port power parameters 3-157
Address Table 3-159
Static Addresses Displays entries for interface, address or VLAN 3-159
Dynamic Addresses Displays or edits static entries in the Address Table 3-160
Address Aging Sets timeout for dynamically learned entries 3-161
Spanning Tree 3-162
Port Loopback Detection Configures Port Loopback Detection parameters 3-164
Trunk Loopback Detection Configures Trunk Loopback Detection parameters 3-164
STA 3-162
Information Displays STA values used for the bridge 3-165
Configuration Configures global bridge settings for STA and RSTP 3-168
Port Information Displays individual port settings for STA 3-172
Trunk Information Displays individual trunk settings for STA 3-172
Port Configuration Configures individual port settings for STA 3-175
Trunk Configuration Configures individual trunk settings for STA 3-175
Table 3-2 Main Menu (Continued)
Menu Description Page