Installation guide

Interface Commands

4-195

Priority for Untagged

Traffic

Indicates the default priority for untagged frames (page 4-277).

GVRP Status Shows if GARP VLAN Registration Protocol is enabled or disabled (page 4-242).

Allowed VLAN Shows the VLANs this interface has joined, where “(u)” indicates untagged and

“(t)” indicates tagged (page 4-251).

Forbidden VLAN Shows the VLANs this interface can not dynamically join via GVRP (page 4-252).

Private-VLAN Mode Shows the private VLAN mode as host, promiscuous, or none (4-264).

Private VLAN

host-association

Shows the secondary (or community) VLAN with which this port is associated

(4-265).

Private VLAN mapping Shows the primary VLAN mapping for a promiscuous port (4-266).

802.1Q-tunnel Status Shows if 802.1Q tunnel is enabled on this interface (page 4-255).

802.1Q-tunnel Mode Shows the tunnel mode as Normal, 802.1Q Tunnel or 802.1Q Tunnel Uplink

(page 4-255).

802.1Q-tunnel TPID Shows the Tag Protocol Identifier used for learning and switching packets

(page 4-256).

Table 4-52 Interfaces Switchport Statistics (Continued)

Field Description