Installation guide

General Security Measures
4-157
4
show web-auth interface
This command displays interface-specific web authentication parameters and
statistics.
Syntax
show web-auth interface interface
• interface - Specifies a port interface.
• ethernet unit/port
- unit - This is unit 1.
- port - Port number. (Range: 1-28)
Default Setting
None
Command Mode
Privileged Exec
Command Usage
The session timeout displayed by this command is expressed in seconds.
Example
Console#show web-auth interface ethernet 1/2
Web Auth Status : Enabled
Host Summary
IP address Web-Auth-State Remaining-Session-Time
--------------- -------------- ----------------------
1.1.1.1 Authenticated 295
1.1.1.2 Authenticated 111
Console#