Installation guide

System Management Commands
4-77
4
show cluster members
This command shows the current switch cluster members.
Command Mode
Privileged Exec
Example
show cluster candidates
This command shows the discovered Candidate switches in the network.
Command Mode
Privileged Exec
Example
UPnP Commands
Universal Plug and Play (UPnP) is a set of protocols that allows devices to connect
seamlessly and simplifies the deployment of home and office networks. UPnP
achieves this by issuing UPnP device control protocols designed upon open,
Internet-based communication standards.
The commands described in this section allow the switch to advertise itself as a
UPnP compliant device. When discovered by a host device, basic information about
this switch can be displayed, and the web management interface accessed.
Note:
UPnP is currently only supported by this switch for Windows Vista, but will
supported for Windows XP in future releases.
Console#show cluster members
Cluster Members:
ID: 1
Role: Active member
IP Address: 10.254.254.2
MAC Address: 00-12-cf-23-49-c0
Description: Ubigate iES4024GP Switch
Console#
Console#show cluster candidates
Cluster Candidates:
Role Mac Description
--------------- ----------------- -----------------------------------------
ACTIVE MEMBER 00-12-cf-23-49-c0 Ubigate iES4024GP Switch
CANDIDATE 00-12-cf-0b-47-a0 Ubigate iES4024GP Switch
Console#
Table 4-1 UPnP Commands
Command Function Mode Page
upnp device Enables/disables UPnP on the network GC 4-78
upnp device ttl Sets the time-to-live (TTL) value. GC 4-78
upnp device advertise
duration
Sets the advertisement duration of the device GC 4-79
show upnp Displays UPnP status and parameters PE 4-79