Installation guide

System Defaults

1-7

Web Management HTTP Server Enabled

HTTP Port Number 80

HTTP Secure Server Enabled

HTTP Secure Port Number 443

SNMP SNMP Agent Enabled

Community Strings “public” (read only)

“private” (read/write)

Traps Authentication traps: enabled

Link-up-down events: enabled

SNMP V3 View: defaultview

Group: public (read only); private (read/write)

Port Configuration Admin Status Enabled

Auto-negotiation Enabled

Flow Control Disabled

Port Trunking Static Trunks None

LACP (all ports) Disabled

Congestion Control Rate Limiting Disabled

Storm Control Enabled (all ports), 64 kbits per second

Address Table Aging Time 300 seconds

Spanning Tree

Algorithm

Status Enabled, RSTP

(Defaults: All values based on IEEE 802.1w)

Fast Forwarding (Edge Port) Disabled

LLDP Status Enabled

Virtual LANs Default VLAN 1

PVID 1

Acceptable Frame Type All

Ingress Filtering Enabled

Switchport Mode (Egress Mode) Hybrid: tagged/untagged frames

GVRP (global) Disabled

GVRP (port interface) Disabled

QinQ Status Disabled

Table 1-2 System Defaults (Continued)

Function Parameter Default