Installation guide

System Management Commands
4-33
4
show memory
This command shows the location and size of free system memory.
Command Mode
Privileged Exec
Example
Frame Size Commands
This section describes commands used to configure the Ethernet frame size on the
switch.
jumbo frame
This command enables support for jumbo frames on the Gigabit Ethernet ports. Use
the no form to disable it.
Syntax
[no] jumbo frame
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
• This switch provides more efficient throughput for large sequential data
transfers by supporting jumbo frames up to 10 KB for the Gigabit Ethernet
Console#show memory
FREE LIST:
Num Addr Size
--- ---------- ----------
1 0x7176640 1024
2 0x7176498 56
.
.
.
SUMMARY:
status bytes blocks avg block max block
------ ---------- --------- ---------- ----------
current
free 27845656 28 994487 27460596
alloc 10713160 42383 252 -
cumulative
alloc 15336128 53452 286 -
Console#
Table 4-10 Frame Size Commands
Command Function Mode Page
jumbo frame Enables support for jumbo frames GC 4-33